Welcome to Creative Recreational Systems Inc.
877-752-9797
preschool-playground-equipment
Home Site Map Blog

PLAYLAND GENERAL PRODUCT SPECIFICATIONS

Manufacturer shall be ISO 9001:2000 certified — Certificate #UQA4000513

ADVENTURE SERIES EXPEDITION SERIES

  • 3.5” O.D. vertical posts 5” O.D. vertical posts 36” deck grid / 48” deck grid 48” deck grid 24” diameter plastic / 30” diameter plastic 30” diameter plastic

    • VERTICAL POSTS (STEEL)

    • 13 gauge galvanized steel (3.5” Series)
    • 11 gauge galvanized steel (5” Series)
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)
    • Triple Flo-Coated corrosion protection – interior and exterior (ASTM B-117)
    • Contains a minimum of 30% recycled steel and is 95%-98% recyclable
    • Manufactured per ASTM 500

    VERTICAL POSTS (RECYCLED PLASTIC)

    • Poly Tuf
    • HDPE Resins
    • Minimum of 50% recycled material – up to 90% recycled material
    • Essentially maintenance-free
    • Color-stabilizing UV pigment systems to help minimize fading

    PIPE

    • Contains a minimum of 30% recycled steel and is 95%-98% recyclable
    • Triple Flo-Coated corrosion protection (interior and exterior)
    • Interior and exterior corrosion resistance (ASTM B-117)
    • Manufactured per ASTM 500

    1-1/4” O.D. ROUND

    • 14 gauge galvanized steel
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)

    1.66” O.D. ROUND

    • 13 gauge galvanized steel
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)
    • 13 gauge galvanized steel
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)

    2-3/8” O.D. ROUND

    • 13 gauge galvanized steel / 9 gauge steel (Bi-pod/Tri-pod top bar)
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)

    3.5” O.D. ROUND

    • 13 gauge galvanized steel (3.5” Series)
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)

    4” O.D. SQUARE

    • 11 gauge galvanized steel
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)

    5” O.D. ROUND

    • 11 gauge galvanized steel (5” Series)
    • 50, 000 PSI yield strength (ASTM E-8)
    • 55, 000 PSI tensile strength (ASTM E-8)

    POST CAPS

    • Aluminum alloy (GM70B) manufactured and tested in accordance with ASTM Standards: ASTM B 179-68, ASTM B 108-68, ASTM E 10-66 and ASTM E 8-66
    • Powder coat finish
    • Available for 3.5” series or 5” series playgrounds

    C-LINE FITTINGS

    • Aluminum alloy (GM70B) manufactured and tested in accordance with ASTM Standards: ASTM B 179-68, ASTM B 108-68, ASTM E 10-66 and ASTM E 8-66
    • Mounts to vertical posts with adhesive gasket and four ¼”x1” TORX self-tapping screws with patch
    • Powder coat finish
    • Pre-drilled
    • Available for panel or pipe applications

    SEALING GASKET

    • Neoprene rubber
    • 60 +/- 5 durometer hardness

    HARDWARE

    • Made from stainless steel or corrosion-resistant coated steel
    • Majority of hardware is stainless steel with exception of the self drilling/self tapping screws and bolts. Stainless steel is too soft for this application.
    • Conforms to ANSI/ASCE-8-90 (stainless steel)
    • Passed 100 hour salt test (corrosion-resistant coated steel)
    • Security patch to insure screw locks into vertical pipe (where applicable)
    • Special tool required for install
    • Tamper resistant

    CHIN-UP BARS

    • 1-1/4” O.D. round galvanized steel
    • 3.5” O.D. vertical posts
    • Powder coat finish

    SWINGS (BI-POD / TRI-POD FRAME)

    • 2-3/8” O.D. round galvanized pipe
    • 9 gauge top bar / 13 gauge legs SWING YOKE
    • 356 aluminum alloy
    • Heat treated to T-6 specifications
    • 30.0 ksi tensile strength
    • 20.0 ksi yield strength
    • Powder coat finish

    ARCH

    • 3.5” FRAME
    • 3.5” O.D. round galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish 5” FRAME
    • 5” O.D. round galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish TIRE SWING
    • 5/0 heavy duty chain
    • SH-40 clevis connector
    • SH-51 tire swivel

    SINGLE 5” POST

    • 5” O.D. round galvanized pipe
    • Powder coat finish

    SWING HANGERS (SH-09 & SH-10)

    • Grade 32510 hot-dipped, galvanized, malleable iron
    • Manufactured per ASTM A339-55
    • Rust proof
    • Lubrication-free brass bearing
    • Plated carriage bolts and machine bolts
    • Will not twist on pipe
    • SH-09 fits 2-3/8” O.D. pipe
    • SH-10 fits 3-1/2” O.D. pipe
    • Smooth, noiseless action

    CLEVIS CONNECTOR (SH-40)

    • Galvanized, forged steel
    • Tamper resistant
    • Galvanized hex pin shoulder bolt
    • Special tool required for install

    SWING HANGERS (SH-46 & SH-48)

    • Grade 32510 hot-dipped, galvanized, malleable iron
    • Manufactured per ASTM A339-55
    • Rust proof
    • Lubrication-free brass bearing
    • Plated carriage bolts and machine bolts
    • Will not twist on pipe
    • SH-46 welded to top bar of 3-1/2” arch swings
    • SH-48 welded to top bar of 5” arch swings and 5” single post swings
    • Smooth, noiseless action

    CLEVIS CONNECTOR (SH-40)

    • Galvanized, forged steel
    • Tamper resistant
    • Galvanized hex pin shoulder bolt
    • Special tool required for install

    SWING HANGERS (SH-46 & SH-48)

    • Grade 32510 hot-dipped, galvanized, malleable iron
    • Manufactured per ASTM A339-55
    • Rust proof
    • Lubrication-free brass bearing
    • Plated carriage bolts and machine bolts
    • Will not twist on pipe
    • SH-46 welded to top bar of 3-1/2” arch swings
    • SH-48 welded to top bar of 5” arch swings and 5” single post swings
    • Smooth, noiseless action

    HEAVY DUTY TIRE SWIVEL (SH-51)

    • Machined steel
    • 90° universal cast steel joint covered by rubber boot
    • Enamel coating
    • Grease fittings for easy maintenance
    • Secured with four plated machine bolts and nylon insert lock nut
    • 3-point mounting system
    • Sealed needle bearings

    SWING HANGERS (SH-33R)

    • Grade 32510 hot-dipped, galvanized, malleable iron
    • Manufactured per ASTM A339-55
    • Rust proof
    • Lubrication-free brass bearing
    • Plated carriage bolts and machine bolts
    • Will not twist on pipe
    • Used for trapeze rings
    • Smooth, noiseless action

    SWING PADS

    • G-FLEX Wear Mat 40”X40”X1.5”
    • Beveled edges
    • No open cell waffle backing
    • Black PUR bound SBR Rubber shred, reclaimed from auto and truck tile waste
    • Bound with a high-strength, weather-resistant binder, compressed to a uniform thickness in a heated mold
    • Impact attenuation: ASTM 1292-04 — Pass at 4’ (1.5” thick only)
    • Flammability: ASTM D-2859 – Pass

    CHAIN (4/0)

    • Hot dipped, galvanized for rust prevention (ASTM A-153)
    • Zinc plated (ASTM B-633)
    • Straight link coil
    • Maximum working load limit 670 pounds
    • Minimum ultimate break 2, 680 pounds
    • 0.85” OD – 0.414” ID
    • 1.80” OAL

    SWING SEATS S-02 BELT SEAT

    • 6” Wide
    • Compression molded from EPDM co-polymer
    • Steel inserts for strength and durability
    • Galvanized hardware

    S-14 HALF BUCKET SEAT

    • Steel inserts for strength and durability
    • Galvanized hardware

    S-11 FRONT SAFETY CHAIN

    • Attaches to half bucket seat with S-hooks
    • Closes with snap
    • Protective plastic cover

    S-16 FULL BUCKET SEAT

    • One-piece co-polymer construction
    • Steel inserts for strength and durability
    • 5” wide band surrounds toddlers
    • Galvanized hardware

    PLASTISOL COATED ITEMS DECKS / PLATFORMS / RAMPS / BRIDGES / ADA PLATFORMS / ADA TRANSFER STATIONS / STAIRS / STEPS

    • 12 Gauge HRPO Steel
    • Perforated surface with holes spaced 1.25” apart o.c.
    • Approx. 5/8” hole size after coating
    • Plastisol coating

    GRAB HANDLE

    • 1-1/4” O.D. round galvanized steel
    • Pre-treatment wash primer
    • Powder coat finish

    KICK PLATES

    • 12 gauge galveneal steel sheet metal
    • Powder coated finish

    POLY SHEET ACTIVITY PANELS / ROCK WALL CLIMBER / PANEL GATE / RIDER BODY / LILY PAD STEPS / PANEL LADDER / CHALLENGE BRIDGE STEPS / SIGNS / INCH WORM BRIDGE STEPS

    • 3/4” high density polyethylene sheeting
    • Tested in accordance with ASTM D1928 Procedure C
    • 4, 400 psi tensile strength (ASTM D638)
    • Textured finish
    • UV stabilized

    OUTRIGGER RAPID ROCKER CENTER PIPE

    • 2” O.D. square steel tube
    • Pre-treatment wash primer
    • Powder coat finish HAND HOLDS
    • 1-1/4” O.D. round steel tube
    • Pretreatment wash primer
    • Powder coat finish SPRING RUBBER
    • Black EPDM rubber
    • M2AA307 B13 C12 F17 Z1
    • Z1 = 26 +/-5 durometer hardness

    OUTRIGGER BOUNCY BOUNCE

    • SPRING RUBBER
    • Black EPDM rubber
    • M2CA 610 A25 B35 C32 F17 Z1 Z2
    • Z1 = EPDM, Z2 = 65 +/-5 durometer hardness HANDRAIL
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish PLATFORM
    • End tabs 2” O.D. square 11 gauge steel tube
    • 12 gauge HRPO steel
    • 50, 000 psi yield strength (ASTM E-8)
    • 55, 000 psi tensile strength (ASTM E-8)
    • Perforated surface – approx. 5/8” diameter spaced 1.25” apart o.c.
    • Plastisol coating

    LANDSCAPE STAKES

    • ¾”X30” Dome Spike Bolt
    • Stakes are A36 milled steel, hot dipped galvanized
    • Manufactured per ASTM A153C HDG

    LANDSCAPE TIMBERS – BLACK

    • High density polyethylene copolymer resin – DMDA-6147 Natural 7
    • Blow molded
    • High mold ability, toughness and stress-crack resistance
    • Uniform wall thickness
    • 5, 000 psi tensile strength (ASTM D638)
    • 3, 600 psi yield strength (ASTM D 638)
    • Stakes are A36 milled steel, hot dipped galvanized, ASTM A 153C

    TALK TUBE CONE

    • Aluminum alloy (ANSI AA319.0 f)
    • 18 ksi tensile strength (yield)
    • 19 ksi compressive strength (yield)
    • Powder coat finish

    POST

    • 1-1/4” O.D. round steel tube
    • Powder coat finish

    THREE WHEEL SWINGER FRAME

    • 2-3/8” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    WHEELS

    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    RUNG LADDER (FREESTANDING ONLY)

    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    PLASTICS TUBES / SLIDES / HEX ROOF / PYRAMID ROOF / HOODS / SPINNERS / CRAWL TUNNELS / COLORED LANDSCAPE TIMERS / SPRING ANIMAL BODY / ADA LANDSCAPE RAMP / TORTOISE CLIMB / TIRES / DINOSAUR CLIMBER / BUBBLE WALL

    • 1st quality linear low density Polyethylene (LDPE) – ExxonMobil LL8450
    • Rotational molded with mold-in graphics (where applicable)
    • 3/8” wall thickness
    • 2, 550 psi tensile strength (ASTM D638)
    • UV stabilized / UV 8 Rating (tested per ASTM G155 cycle 1 guidelines)
    • Anti-static inhibitors

    HORIZONTAL LADDERS (STANDARD / 180 DEGREE / 360 DEGREE) TOP RAIL

    • 2-3/8” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish END PIPES (where applicable)
    • 1.9” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish HAND RAILS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish RUNG LADDER (FREESTANDING ONLY)
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    BRIDGES Arched Bridge BRIDGE

    • 12 gauge HRPO steel
    • Perforated surface
    • Plastisol coating
    • Perforated surface – approx. 5/8” diameter spaced 1.25” apart o.c. HAND RAILS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    Suspension Bridge BRIDGE

    • 12 gauge HRPO steel
    • Perforated surface – approx. 5/8” diameter spaced 1.25” apart o.c.
    • Plastisol coating HAND RAILS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    Chain Bridge BRIDGE

    • 4/0 (.218”) STR Coil H plastisol coated, galvanized chain
    • 7/8” O.D. x 18 gauge wall thickness tubing HAND RAILS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    Challenge Bridge BRIDGE

    • Poly Sheet
    • 1-1/4” O.D. round steel tube
    • Powder coat finish HAND RAILS AND VERTICAL PICKETS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    Lily Pad Bridge BRIDGE

    • Poly Sheet
    • 1-1/4” O.D. round steel tube
    • Powder coat finish HAND RAILS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish VERTICAL PICKETS
    • 2-3/8” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    Inch Worm Bridge BRIDGE

    • Poly Sheet steps
    • Rubber torsion spring
    • 2-3/8” O.D. round steel tube
    • Powder coat finish HAND RAILS
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish GATED ENTRY
    • 1-1/4” O.D. pipe
    • Pre-treatment wash primer
    • Powder coat finish

    Squiggle Bridge PICKETS

    • 1-1/4” O.D. round steel tube UPPER/LOWER BAR
    • 1.66” O.D. pipe GATED ENTRY
    • 1-1/4” O.D. pipe
    • Pre-treatment wash primer
    • Powder coat finish

    SLIDES TRIPLE RAIL / 90° CURVE / DOUBLE WALL / DOUBLE WIDE / WAVE / CHUTE / ALPINE THUNDER / SPIRAL / TUBE SLIDES

    • 1st quality linear low density Polyethylene (LDPE) – ExxonMobil LL8450
    • Rotational molded
    • 3/8” wall thickness
    • 2, 550 psi tensile strength (ASTM D638)
    • UV stabilized
    • Anti-static inhibitors
    • Triple Rail / Double Wide slide mount on 48” wide deck (use 3’x4’ rectangle deck on Adventure Series)

    SLIDE FOOT

    • 3.5” O.D. support post
    • Pre-treatment wash primer
    • Powder coat finish

    SLIDE SUPPORT

    • 3.5” O.D. galvanized steel support post
    • Post manufactured per ASTM 500
    • Plate manufactured per ASTM A90, A568, A902, A924, D2092, E517, E646 and ISO3575
    • Pre-treatment wash primer
    • Powder coat finish

    SPRING ASEMBLY FOR RIDERS COIL SPRING

    • 5160H steel alloy
    • Carbon Chromium grade of spring steel
    • 5-3/4” O.D. spring
    • 13/16” O.D. bar
    • Pre-treatment wash primer
    • Black powder coat finish C SPRING
    • ¾” thick steel
    • Conforms with ASTM A36-77A
    • 58, 000 psi tensile strength
    • 36, 000 psi yield strength
    • Pre-treatment wash primer
    • Powder coat finish

    LOG ROLL LOG

    • Rotomolded Plastic GRAB HANDLES
    • 1-1/4” O.D. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish

    CLIMBERS Spiral Step Climber STEPS

    • Poly Sheet GATED ENTRY
    • 1-1/4” O.D. pipe
    • Pre-treatment wash primer
    • Powder coat finish CENTER POST
    • 3-1/2” or 5” Post (depending on version)

    Education Climber CLIMBER

  • Rotomolded Plastic
  • Mounts on 48” wide deck (uses 3’x4’ rectangle deck on Adventure

Series) GATED ENTRY

  • 1-1/4” O.D. pipe
  • Pre-treatment wash primer
  • Powder coat finish WIDE SLIDE FOOT
  • 1-1/4” O.D. pipe
  • 12 gauge galvanized steel L-bracket
  • Pre-treatment wash primer
  • Powder coat finish

Bedrock Climber CLIMBER

  • Plastic
  • Mounts on 48” wide deck (uses 3’x4’ rectangle deck on Adventure

Series) GATED ENTRY

  • 1-1/4” O.D. galvanized pipe
  • Pre-treatment wash primer
  • Powder coat finish

    • Lily Pad Climber LILY PAD

    • Poly sheet GATED ENTRY
    • 1-1/4” O.D. galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish SUPPORT POSTS
    • 3.5” O.D. galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish

    Cargo Net Climber CLIMBER

    • 4/0 (.218”) STR Coil H galvanized chain
    • Plastisol coating
    • 7/8” O.D. x 18 gauge wall thickness tubing BRACKET
    • 9 gauge galvanized flat steel
    • Pre-treatment wash primer
    • Powder coat finish CLEVIS CONNECTOR (SH-40)
    • Galvanized, forged steel
    • Tamper resistant – special tool required for install
    • Galvanized hex pin shoulder bolt GATED ENTRY
    • 1-1/4” O.D. galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish

    Tortoise Climber CLIMBER

    • Rotomolded Plastic BRACKETS
    • 16 gauge milled steel

    Concentration Climber/Rock Climbing Wall Climber

  • Poly sheet Foot holds
  • Aluminum alloy

    • Tire Climber TIRES

    • Rotomolded plastic GATED ENTRY
    • 1-1/4” O.D. pipe
    • Pre-treatment wash primer
    • Powder coat finish LEGS
    • 1-1/4” post

    Bubble Wall Climber BUBBLE WALL

    • Rotomolded plastic SUPPORT POSTS
    • 3.5” or 5” O.D. galvanized pipe – depending on series
    • Pre-treatment wash primer
    • Powder coat finish

    CLIMBERS — METAL CLOVER / COIL / SNAKE / TREE / DEEP RUNG ARCH / MOUNTAIN / RUNG LADDER / SLIDING POLE / LOOP / BUBBLE / HALF MOON / MANHOLE / QUICK / RING / ZIPPER
    CENTER POLE

    • 1.66” O.D. galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish HAND/FOOT RUNGS
    • 1-1/4” O.D. galvanized pipe
    • Pre-treatment wash primer
    • Powder coat finish GATED ENTRY
    • 1-1/4” O.D. pipe
    • Pre-treatment wash primer
    • Powder coat finish BRACKET
    • 9 gauge galvanized flat steel
    • Pre-treatment wash primer
    • Powder coat finish

    RUBBER TORSION SPRINGS (INCH WORM BRIDGE / SEE SAW)

    • 4 specially compounded rubber cords encapsulated between an outer metal tube and a solid inner core
    • Self-dampening
    • Reduced shock transmission
    • Absorbs vibration
    • No pinch points
    • Progressive loading

    PIPE WALL

  • 1-1/4” O.D. galvanized steel support post
  • Pre-treatment wash primer
  • Powder coat finish

    • STAIRS TREADS & STRINGERS

    • 12 gauge HR steel
    • Perforated surface – 1.25” o.c. between perforations
    • Plastisol coating ROD
    • ¼” diameter rod HANDRAILS & GATES
    • 1-1/4” O.D. pipe
    • Pre-treatment wash primer
    • Powder coat finish

    BALANCE BEAM (ZIG ZAG & STRAIGHT)BEAM

  • 4” O.D. square steel tube
  • Pre-treatment wash primer
  • Powder coat finish SUPPORT POSTS
  • 2-3/8” O.D. round steel tube
  • Pre-treatment wash primer
  • Powder coat finish

    • TRAPEZE BAR BAR

    • 1.25” o.d. round steel tube
    • Pre-treatment wash primer
    • Powder coat finish TRAPEZE RING
    • A-09 ring
    • Blue Plastisol coating
    • Grip diameter: 1-1/4”
    • Complies with ASTM and CPSC requirements

    DOMES

    • GE Plastics Lexan XL-10
    • 1/8” thick
    • Vacuum formed
    • UV stabilized
    • Crack/Break/Shatter resistant
    • Self-extinguishing
    • UV-94-HB fire rating

    SHADE STRUCTURES

    • 100% Virgin Polymer (high density polyethylene, polyester or polypropylene)
    • Warp Knitted fabric (Rachel or tricot type)
    • Fabric shall be stentered (heat set) during manufacture
    • The knit structure shall be a minimum of 16 gauge / maximum of 24 gauge
    • Tested in accordance with ASTM D 5035, ASTM D 2261, BS 6906: Part 4
    • Minimum initial shade cover levels of 75% – 90% depending on color
    • Minimum initial ultraviolet blockout levels of 86% – 92% depending on color
    • Minimum lifespan of 10 years against UV degradation and shall have a minimum breaking strength of 50% of its initial breaking strength when tested in accordance with ASTM D5035 after 8 years of exposure to sunlight

    PRE-TREATMENT WASH PRIMER

    • 4860-420 primer / 1000-44 activator
    • Polyvinyl-butyral resin based primer
    • Used on all milled steel and all weld joints
    • Designed to give adhesion along to a wide variety of metal substrates
    • Provides added metal protection against rust
    • Imparts extra durability to topcoat (powder coat)
    • When reduced properly, it meets the definition of a “pre-treatment” primer found in many air quality regulations

    COATINGS Powder Coating

    • TGIC polyester
    • Electrostatic application
    • Baked-on @ 400 degrees
    • 5-7 mills thick
    • Lead free
    • High gloss
    • No peel / No flake finish
    • Resistant to salt spray (ASTM B-117)
    • Resistant to humidity (ASTM D-2247)
    • Direct/Indirect impact 120 in. pounds (ASTM D-2794)
    • Good to excellent resistance to most solvents, oils, acids and alkalis

    Plastisol Coating

    • MISTAFLEX V4612
    • 80-100 mills thick
    • Shore A, 65-70 durometer min. hardness (ASTM D2240-66T)
    • 1, 000 psi minimum tensile strength (ASTM D638, ASTM D412)
    • Resistant to abrasion (ASTM D4060)
    • UV stabilized
    • Self-extinguishing
    • Increased traction

    BASKETBALL BACKSTOPS 3.5” POST

    • Made from a single piece of galvanized pipe with a 3’ extension
    • Backboard is made of #319 aluminum alloy
    • 18” diameter high carbon 5/8” thick steel ring
    • Nylon net (120 thread count, hourglass shape)

    4.5” POST

    • Made from a single piece of galvanized pipe with a 4’ extension
    • Backboard is made of #319 aluminum alloy

      • Double rim goal (one 5/8” diameter and one 1/2” diameter rim welded together in no less than six places

    • Steel chain net

    BIKE RACKS “M” STYLE

    • Inline galvanized 2-3/8” steel tubing

      • TRADITIONAL

      • Rod is .5” diameter HR – hot dipped galvanized steel
      • Round tube is HR 1.66”x.118” hot dipped galvanized steel
      • Zinc plated hardware

      KIDS CENTER PLASTICS

      • 1st quality linear low density Polyethylene (LDPE) – Samsung #64
      • Rotational molded
      • 5mm wall thickness
      • UV stabilized
      • Anti-static inhibitors POST
      • 6 cm Galvanized steel
      • Interior and exterior corrosion resistance HARDWARE
      • Conforms to ANSI/ASCE-8-90
      • Security patch to insure screw locks into vertical pipe
      • Tamper resistant

      HAVE QUESTIONS?

      Use our online form to send us your comments or questions.